ПвВГ (PvVG), АПвВГ (APvVG), ПвВГЭ (PvVGE), АПвВГЭ (APvVGE), ПвБШв (PvBShv), АПвБШв (APvBShv), ПвВГ-П (PvVG-P), АПвВГ-П (APvVG-P), ПвБШп (PvBShp), АПвБШп (APvBShp),

PvVG, APvVG, PvVGE, APvVGE, PvBShv, APvBShv, PvVG-P, APvVG-P, PvBShP, APvBShP, according to specification 16-705.499-2010

Specifications 16-705.499-2010

Construction Application area Technical data Calculated data

Conductor

Copper or aluminum core, single-wire or multiwire, circular or sector-shaped form of the 1 or 2 class according to GOST 22483.

Nominal cross-section of main conductors

From 1,5 to 1000 Insulation XLPE (color coded conductor).

Core arrangement and twisting

Insulated conductors of 2, 3, 4 and 5 core cables twisted in a cable core.

For the cables of types PvVG-P, APvVG-P insulated cores are situated in parallel in the same flat.

Inner sheath

It is made by extrusion with PVC filling of exterior gaps between insulated cores or ( for not armored cables with copper sector-shaped conductors) taped with PVC tapes with the filling of exterior gaps between insulated cores, insulating cords (bundles).

For the cables of types PvBShp, APvBShp is made by extrusion with PVC compound or XLPE.

Screen

For PvVGE, APvVGE is made in the form of taping with the copper tapes or by the agreement with a customer of copper wires and helically superimposed copper tape.

Cable armoring

For PvBShv, APvBShv, PvBShp, APvBShp is made by spiral taping with two steel galvanized tapes.

Cable sheath or jacket

For PvVG, APvVG, PvVGE, APvVGE, PvBShv, APvBShv, PvVG, APvVG - PVC compound.

For PvBShp, APvBShp of polyethylene.

The cables are designed for electric power transmission and distribution of electric energy in stationary installations for a nominal alternating voltage 0,66; 1 and 3 kV, 50 Hz

The cables are designed for installation of single cable lines.

The cables of types PvBShv, APvBShv in single-core modification are designed for operation in DC voltage network.

The class of fire hazard of the cables is according to GOST 31565 01.8.2.5.4.

Nominal voltage, kV		0,66; 1 or 3
Ambient temperature during cable operation, °С		от – 50 до + 50
Minimum bending radius, diameters of cable	for multi-core	7,5
	for single-core	10
The cables are laid at temperature (without preheat), ⁰C not below		- 15

TABLE 1

Nominal voltage of the cables, number and nominal cross-section of current-carrying conductor

* – for cables with the copper screen only
** – for operation in DC voltage only

Type of cable	Number of conductors	Nominal cross-section
		of main conductors, mm²
		Nominal voltage, kV
		0,66	1	3
PvVG, PvVGE	1	1,5 - 50	1,5 - 1000	(1,5 - 1000)*
	3, 4		1,5 - 400	–
	2, 5		1,5 - 240
APvVG, APvVGE	1	2,5 - 50	2,5 - 1000	(2,5 - 1000)*
	3, 4		2,5 - 400	–
	2, 5		2,5 - 240
PvBShv, PvBShp	1	–	(10 - 630) **	–
	3	1,5 - 50	1,5 - 400	6 - 240
	4			–
	2, 5		1,5 - 240	–
APvBShv, APvBShp	1	–	(10 - 630) **	–
	3	2,5 - 50	2,5 - 400	10 - 240
	4			–
	2, 5		2,5 - 240	–

TABLE 2

Current-carrying conductors are manufactured singleor multi-wire in accordance with the table

Type of conductor	Nominal cross-section of main conductors, mm²
	Circular		Sector-shaped
	copper	aluminum	copper	aluminum
singular	1,5 - 50	2,5 - 300	–	2,5 - 400
multi-wire	16 - 1000	25 - 1000	25 - 400	25 - 400

TABLE 3

Cross-section of copper wires

Designation	Nominal cross-section of main conductors, mm²
Main conductors	25	35	50	70	95	120	150	185	240	300	400
Screen	16	16	25	35	50	70	70	95	120	150	185

Filter
By category:
Voltage:
In execution:
Insulation:
Shell:
Core material:

Filter
By category:
Voltage:
In execution:
Insulation:
Shell:
Core material: