Conductor

Copper, single-wire, of the 1 class according to GOST 22483, with the cross-section from 1.5 to 6 mm2.

Insulation

For cables of types KPvBShvng(A)-LS – cross-linked, halogen free polymer composition.

For cables of types KPBShvng(A)-LS – thermoplastic, cross-linked, halogen free polymer composition.

Core arrangement and twisting

Number of conductors from 4 to 61.

The insulated conductors are twisted in a cable core.

The cables have a digital and color coded marking of the conductors.

Inner sheath

It is made by extrusion with filling with the halogen free polymer compositions.

Cable armoring

It is laid helically with two steel, galvanized tapes.

It is possible to lay the PET-tapes by winding or longitudinally over the armor.

Cable sheath or jacket

PVC-compound of low fire hazard.

The cables are designed for transmission and distribution of electric energy in stationary installations, for installation in cable structures, buildings and underground structures, including flammable and explosive areas.

The class of fire hazard of the cables according to GOST 31565-2012 П1б.8.2.2.2

Nominal voltage, kV : 0,66

Ambient temperature during cable operation, °С: от – 50 до + 50

Resistant with a relative humidity up to 98% at ambient temperature, degree Celsius: +35

Minimum bending radius of the cables, diameters of the cable: 10

Service life, years, not less: 30

Smoke generation in the test cell: not more than 50%

Flame retardant test on category: А

Equivalent toxicity index, g/m3 , more than: 40