Products

Search by features


VGng (A)-KhL, AVVGng (A)-KhL, VVGEng (A)-KhL, AVVGEng (A)-KhL, VBShVng (A)–KhL, AVBShVng (A)–KhL, VBaShVng (A)–KhL, AVBaShVng (A)–KhL, VeBShvng (A)–KhL, AVeBShvng (A)–KhL, VeBShvng (A)–KhL, АVeBShvng (A)–KhL, according to specifications 16.K121-027-20133
specifications 16.K121-027-20133

Conductor

Copper or aluminum core of circular or sector-shaped form, of the 1 or 2 class according to GOST 22483 with the cross-section from 1.5 to 1000 mm2.

Insulation

PVC-compound (color coded conductor).

Core arrangement

Insulated conductors of 2, 3, 4, 5 and 6 core cables twisted in cable core.

Inner sheath

PVC-compound of low flammability is manufactured with the filling of exterior gaps between insolated conductors.

Screen

For cables of types VVGEng(A)-KhL, AVVGEng(A)-KhL, VeBShvng(A)–KhL, AVeBShvng (A)–KhL, VeBShvng(A)–KhL, АVeBShvng(A)–KhL screen is made of copper tapes or copper wires and spiral taping with a copper tape.

Separating layer

PVC-compound of low flammability for cables of types VeBShvng(A)–KhL, AVeBShvng(A)–KhL, VeBShvng(A)–KhL, АVeBShvng(A)–KhL.

Cable armoring

Laid helically:

  • two steel, galvanized tapes for cables of types VBShVng(A)–KhL, AVBShVng(A)–KhL, VeBShvng (A)–KhL, AVeBShvng(A)–KhL;
  • two aluminum tapes or aluminum alloy for cables of types VBaShVng(A)–KhL, AVBaShVng(A) –KhL, VeBShvng(A)–KhL, АVeBShvng(A)–KhL.

Cable sheath or jacket

PVC-compound of low flammability

The cables are designed for transmission and distribution of electric energy in stationary electric installations on alternating voltage 0,66 and 1 kV and frequency 50 Hz or direct voltage 1 and 1.5 kV correspondingly with the possibility of installation without preheat at temperature up to -30o C.

The cables are used for group installation in cable lines in cable constructions, open-air electrical installations (cable overpasses, arcades).

Shielded cables are used when it is necessary to protect the electric chains from influence of external electric fields.

The armored cables are used in case of danger of mechanical damage in process of operation, if the cable is not subjected to significant tensile forces.

While manufacturing the cables the materials, which allow the cables to be resistant to ambient low temperatures up to – 600C (degrees below zero) are used.

The class of fire hazard of the cables according to GOST 31565 of cables of modification «ng (À)–KhL» -П1б.8.2.5.4.

Nominal voltage, kV 0,66 or 1
Ambient temperature during cable operation, °С from – 60 to + 50
Minimum bending radius, diameters of cable for multi-wire 7,5
for single-wire 10
The cables are laid at temperature (without preheat), °С, not below - 30

TABLE 1

Nominal voltage of the cables, number and nominal cross-section of current - carrying conductor

* – for operation in DC voltage only

Type of cable Number of conductors Nominal cross-section of main conductors, mm2
Nominal voltage, kV
0,66 1
VVGng(A)-KhL, VVGEng(A)-KhL 1 1,5 – 50 1,5 – 1000
AVVGng(A)-KhL, AVVGEng(A)-KhL 2,5 – 50 2,5 – 1000
VBShvng(A)–KhL*, VBaShvng(A)–KhL*, VEBShvng(A)–KhL, VEBaShvng(A)–KhL 1,5 – 1000
AVBShvng(A)–KhL*, AVBaShvng(A)–KhL*, AVEBShvng(A)–KhL, АVEBaShvng(A)–KhL 2,5 – 1000
VVGng(A)-KhL, VVGEng(A)-KhL 2, 3, 4, 5, 6 1,5 – 50 1,5 – 400
AVVGng(A)-KhL, AVVGEng(A)-KhL 2,5 – 50 2,5 - 400
VBShvng(A)–KhL, VBaShvng(A)–KhL, VEBShvng(A)–KhL, VEBaShvng(A)–KhL 1,5 – 50 1,5 – 400
AVBShvng(A)–KhL, AVBaShvng(A)–KhL, AVEBShvng(A)–KhL, АVEBaShvng(A)–KhL 2,5 – 50 2,5 - 400


TABLE 2

Current-carrying conductors are manufactured singleor multi-wire in accordance with the table

Type of conductor Nominal cross-section of main conductors, mm2
Circular Sector-shaped
copper aluminum copper aluminum
singular 1,5 - 50 2,5 - 300 25 - 400
multi-wire 16 - 1000 25 - 1000 25 - 400 25 - 400

 

TABLE 3

Cross-section of copper wires

Designation Nominal cross-section of main conductors, mm2
Main conductors 1,5 2,5 4 6 10 16 25 35
Screen 1,5 2,5 4 6 10 16 16 16
Designation Nominal cross-section of main conductors, mm2
Main conductors 50 70 95 120 150 185 240 300 400
Screen 25 35 50 70 70 95 120 150 185
You can create an application yourself. Using the "Add brand manually" button, select the required cable brand and specify the quantity. After submitting the form, our managers will contact you and clarify the details of the order.

« * »  - required fields


FULL NAME:*

E-mail:*

Telephone:*

A comment:

Attach file