Conductor

Copper of round form, single-wire with the cross-section from 1.5 to 16 mm² of the 1 class or multi-wire core with the cross-section from 10 to 16 mm² of the 2 class according to GOST 22483.

From 1 to 5 conductors.

Insulation

Ceramic forming silicone rubber.

Core arrangement

Insulated conductors of 2-5 core cables are twisted.

Insulated conductors of 2 and 3 core cables of types RVG-Png(A)-FRLSTx are arranged in parallel in one flat.

Inner sheath

PVC-compound of low toxicity.

Screen

For cables of types RVGEng(A)-FRLSTx is made of copper tapes.

Over sheath

PVC-compound of low toxicity

The cables are designed for transmission and distribution of electric power in stationary installations on the nominal alternating voltage to 0.66 and 1kV and frequency 50 Hz.

The cables do not spread combustion at group installation of cable lines in the absence of mechanical effects on the cable and keep working when exposed by flame on the cable not less than 180 minutes.

The cables are designed for wiring and emergency power circuits of equipment (current collectors), in residential and public buildings, in the surgical departments of hospitals, in the office premises, equipped with computer and micro processor devices, spectacular complexes and sports facilities, as well as in other objects with the high demand of fire safety.

The class of fire hazard of the cables according to GOST 31565 П1б.1.2.1.2.