АПвВГЭнг(А)-ХЛ (APvVGEng(A)-KhL)

SCOPE AND PURPOSE

The cables are designed for transmission and distribution of electric energy in stationary electric installations on alternating voltage 0,66 and 1 kV and frequency 50 Hz.

The cables are used for group installation in cable lines in cable constructions, open-air electrical installations (cable overpasses, arcades).

While manufacturing the cables one uses the materials, which allow the cables to be resistant to low temperatures up to – 60⁰C (degrees below zero) are used.

The class of fire hazard of the cables according to GOST 31565 П1б.8.2.5.4.

STRUCTURE

Conductor

Aluminum core of circular of sector-shaped form, of the 1 or 2 class according to GOST 22483.

Insulation

XLPE (color coded conductor).

Core arrangement and twisting

Insulated conductors of multi-core cables are twisted. It is allowed to manufacture cables with SZ-stranding.

Inner sheath

PVC-compound or PVC-compound of low flammability is manufactured with the extrusion with filling of exterior gaps between insolated conductors (for cables with nominal cross-section to 16 mm² inclusive the inner sheath may be without any filling.

Screen

For cables of types APvVGEng (A)KhL is made of copper tapes or copper wires and a spiral taping with a copper tape.

Taping

It is allowed to lay a separation layer of fiberglass on top of the screen. It is possible to lay water-blocking tape instead of the above one, that is stipulated in the order, in this case letter ‘’F’’ is entered in the designation of the cable.

Cable sheath or jacket

PVC-compound of low flammability