ВБШвгнг(А)-ХЛ (VBShvgng(A)-KhL)

SCOPE AND PURPOSE

The cables are designed for transmission and distribution of electric energy in stationary electric installations on alternating voltage 0,66 and 1 kV and frequency 50 Hz or direct voltage 1 and 1.5 kV correspondingly with the possibility of installation without preheat at temperature up to -30^o C.

The cables are used for group installation in cable lines in cable constructions, open-air electrical installations (cable overpasses, arcades).

The armored cables are used in case of danger of mechanical damage in process of operation, if the cable is not subjected to significant tensile forces.

While manufacturing the cables the materials, which allow the cables to be resistant to ambient low temperatures up to – 60⁰C (degrees below zero)as well as water blocking materials, which provide resistance to longitudinal water penetration and install of the cables in wet conditions are used.

The class of fire hazard of the cables according to GOST 31565 of cables of modification «ng (À)–KhL» - П1б.8.2.5.4.

STRUCTURE

Conductor

Copper, single-wire or multi-wire core, of circular or sector-shaped form, of the 1 or 2 class according to GOST 22483 with the cross-section from 1.5 to 1000 mm².

Insulation

PVC-compound of low flammability (color coded conductor).

Core arrangement

Insulated conductors of 2, 3, 4, 5 and 6 core cables twisted in cable core with water blocking elements.

Inner sheath

PVC-compound of low flammability is manufactured with the filling of exterior gaps between insolated conductors.

Cable armoring

Two steel, galvanized tapes.

Cable sheath or jacket

PVC-compound of low flammability.