Conductor

Copper, single-wire, of the 1 class according to GOST 22483, with the cross-section from 1.5 to 6 mm2.

Insulation

For cables of types KPvBPng(A)- HF – cross-linked, halogen free polymer composition.

For cables of types KPBPng(A)- HF – thermoplastic, halogen free polymer composition.

Core arrangement

The number of conductors is from 4 to 61.

The insulated conductors are twisted in a cable core.

The cables have a digital and color coded marking of the insulated conductors.

Inner sheath

It is made by halogen free, polymer composition extrusion with the filling.

Cable armoring

It is laid helically with two steel, galvanized tapes.

It is possible to lay the PET-tapes by winding or longitudinally over the armor.

Cable sheath or jacket

Halogen free polymer composition.

The cables are designed for transmission and distribution of electric energy in stationary electric installations, for installation in cable structures, buildings and underground structures, including flammable and explosive areas.

The class of fire hazard of the cables according to GOST 31565 П1б.8.1.2.1

Nominal voltage, kV : 0,66

Ambient temperature during cable operation, °С: from -50 to +50

Resistant with a relative humidity up to 98% at ambient temperature, °С: +35

Minimum bending radius of the cables,diameters of the cable: 10

Service life, years, not less: 40

Smoke generation in the test cell: not more than 40 %

Test category on the flame retardance: А

Equivalent index of toxicity, g/m3 , more: 40