Products

Search by features


KVVGng(A), KVVGzng(A), KVVGЕng(A), KVBbShvng(A), KVBbShvzng(A), according to specifications 3563-004-53972660-2008
specifications 3563-004-53972660-2008

Conductor

Copper, single-wire, of the 1 class according to GOST 22483, with the cross-section from 0.75 to 6 mm2.

Insulation

PVC-compound.

Core arrangement

From 4 to 127 insulated conductors.

The insulated conductors are twisted; there is a marker pair in each layer.

Separating layer

PVC-compound or a layer with the PET tape.

Screen for cables of types KVVGЕng(A)

Foiled alumoflex with the contact conductor with a copper, galvanized wire.

Cable armoring

For cables of types KVBbShvng(A) and KVBbShvzng(A) is laid helically with two steel, galvanized tapes.

Over sheath or jacket

PVC-compound of low flammability

The cables are designed for fixed connection to electrical devices and equipment, to assemblies of clamps of electrical switch gear with the nominal alternating voltage up to 660V of frequency up to 100 Hz or direct voltage up to 1000V for installation in the premises, conduits, tunnels, in conditions of aggressive environment, in the absence of mechanical effects on cable.

It is possible to lay the cable in the ground (trenches) where the places of the exit of the cable from the ground to the surface are protected. The cables are used for installation in cable structures and spaces for providing of fire safety.

The cables of type KVVGzng(A) are used for installations requiring seal cables when entering.

The class of fire hazard of the cables according to GOST 31565 01.8.2.5.4.

Nominal voltage, kV 0.66
Ambient temperature during cable operation, °С from – 50 to + 50
Minimum bending radius of the cables at installation at ambient temperature not below 00C makes: for cables with the external diameter up to 10mm inclusive, diameters of the cable not less than 3
for cables with the external di ameter from 10 up to 25mm inclusive, diameters of the cable not less than 4
Durably allowable temperature of heating of conductors during operation, °С + 70
Minimum bending radius of the cables at installation without preheat at ambient temperature not below -150C makes, diameters of the cable not less than 6
You can create an application yourself. Using the "Add brand manually" button, select the required cable brand and specify the quantity. After submitting the form, our managers will contact you and clarify the details of the order.

« * »  - required fields


FULL NAME:*

E-mail:*

Telephone:*

A comment:

Attach file