ПВ1 (PV1) - Russian analogue of H07V-U
SCOPE AND PURPOSE
The wires are intended for electric installations at stationary laying in lighting and power electric networks as well as for installation of electrical equipment on the nominal alternating voltage up to 450 V (for networks up to 450/750V) of nominal frequency up to 400 Hz or on direct voltage up to 1000V.
For installation in steel pipes, on cable trays and others, for installation of electric circuits.
STRUCTURE
Conductor
Copper, single-wire or multi-wire, of circular form, of the 1 or 2 class according to GOST 22483 with the cross-section from 0.5 to 95.0mm2.
Insulation
PVC-compound
Nominal cross-section of conductors (mm2) | Calculated diameter of wire, mm | Calculated weight of wire, kg/km | |
PV1 0,5мк | 2,6 | 9 | |
PV1 0,75мк | 2,8 | 12 | |
PV1 1,0мк | 3 | 14 | |
PV1 1,2мк | 3,3 | 18 | |
PV1 1,5мк | 3,4 | 20 | |
PV1 2,0мк | 3,7 | 28 | |
PV1 2,5мк | 4,2 | 31 | |
PV1 3,0мк | 4,4 | 38 | |
PV1 4,0мк | 4,8 | 48 | |
PV1 5,0мк | 5,2 | 62 | |
PV1 6,0мк | 6,3 | 70 | |
PV1 8,0мк | 7 | 94 | |
PV1 10мк | 7,6 | 116 | |
PV1 16мк | 8,8 | 182 | |
PV1 25мк | 11 | 287 | |
PV1 35мк | 12,5 | 378 | |
PV1 50мк | 14,5 | 520 | |
PV1 70мк | 17 | 730 | |
PV1 95мк | 19 | 985 |