ПВ1 (PV1) - Russian analogue of H07V-U ПВ1-ХЛ (PV1-KhL) - Russian analogue of H07V-U Cold Resistance ПВ2 (PV2) - Russian analogue of H07V-R ПВ2-ХЛ (PV2-KhL)- Russian analogue of H07V-R Cold Resistance ПВ3 (PV3) - Russian analogue of H07V-K ПВ3-ХЛ (PV3-KhL) - Russian analogue of H07V-K Cold Resistance ПВ4 (PV4) - Russian analogue of H07V-K ПВ4-ХЛ (PV4-KhL) - Russian analogue of H07V-K Cold Resistance ППВ (PPV) - Russian analogue of H07VH2-U ППВ-ХЛ (PPV-KhL) - Russian analogue of H07VH2-U Cold Resistance АПВ (АPV) - Russian analogue of H(Al)07VH2-U АПВ-ХЛ (АPV-KhL) - Russian analogue of H(Al)07VH2-U Cold Resistance АППВ (АPPV) – No European analogue АППВ-ХЛ (АPPV-KhL) - No European analogue
GOST 6323-79 (only to sales ordered by the Ministry of the Russian Federation and the CIS Defense)
You can pre-order the products. After the receipt of your order a specialist of our company will contact you and offer the best delivery conditions.
Conductor
Copper or aluminum, single-wire or multi-wire, of circular form, of the 1, 2, 3, 4 or 5 class according to GOST 22483 with the cross-section from 0.5 to 120mm2.
Insulation
PVC-compound:
The wires of types PPV, PPV-KhL, APPV, APPV-KhL with the laid in parallel in one flat 2 and 3 cores must be insulated with the separated tape base.
The wires are intended for electric installations at stationary laying in lighting and power electric networks as well as for installation of electrical equipment on the nominal alternating voltage up to 450 V (for networks up to 450/750V) of nominal frequency up to 400 Hz or on direct voltage up to 1000V.
For installation in steel pipes, on cable trays and others, for installation of electric circuits.
For manufacturing of the cables in cold resistant modification with index “Cold Resistance” the materials, which allow the cables to be resistant to the impact of ambient low temperatures up to – 600C (degrees below zero) are used.
Nominal voltage, V | 450 | |
Ambient temperature during cable operation, °С | APV, PV1, PV2, PV3, PV4, PPV, APPV | from - 50 to + 70 |
APV-KhL, PV1-KhL, PV2- KhL, PV3-KhL, PV4-KhL, PPV-KhL, APPV-KhL | from - 60 to + 70 | |
Minimum bending radius of the cables, diameters of the wire | APV, APV-KhL, PV1, PV1-KhL, PPV, PPV-KhL, APPV, APPV-KhL | 10 |
PV2, PV2-KhL, PV3, PV3-KhL, PV4, PV4-KhL | 5 | |
The ambient temperature for installation of the cables (without preheat), 0C not below | - 15 |
Table 1
The correspondence of wires, of nominal cross section of conductor, of number of conductors and class of flexibility of the core according to GOST 22483
Type | Nominal cross-section of current-carrying conductor, mm2 | Number of conductors | Class according to GOST |
APV | from 2,5 to 16,0 inclusive | 1 | 1 |
from 25,0 to 120 | 2 | ||
PV1 | from 0,5 to 10,0 inclusive | 1 | 1 |
from 16,0 to 95,0 | 2 | ||
PV2 | from 2,5 to 95,0 | 1 | 2 |
PV3 | from 0,5 to 1,5 inclusive | 1 | 2, 3 or 4 |
« 2,5 « 4,0 « | 4 | ||
« 5,0 « 95,0 « | 3 | ||
PV4 | 0,5 and 0,75 | 1 | 5 |
1,0 and 1,5 | 4 or 5 | ||
2,5 and 4,0 | 5 | ||
6,0 and 10,0 | 4 or 5 | ||
APPV | from 2,0 to 6,0 inclusive | 2, 3 | 1 |
PPV | from 0,75 to 4,0 inclusive | 2, 3 | 1 |
To make an order
You can pre-order the products. After the receipt of your order a specialist of our company will contact you and offer the best delivery conditions.
«*»- required fields