ВВГ (VVG) - Russian analogue of NYSY АВВГ (AVVG) - Russian analogue of NAYSY ВВГг (VVGg) - Russian analogue of NYS(F)Y АВВГг (AVVGg) - Russian analogue of NAYS(F)Y ВБВ (VBV) - Russian analogue of NYSBY АВБВ (AVBV) - Russian analogue of NAYSBY ВБВг (VBVg) - Russian analogue of NYBS(F)Y
specifications 16.K121-028-2013
You can pre-order the products. After the receipt of your order a specialist of our company will contact you and offer the best delivery conditions.
Conductor
Copper or aluminum, single-wire or multi-wire core, of circular or sector-shaped form, of the 1 or 2 class according to GOST 22483.
Insulation
Is made of PVC-compound (color coded conductor)
Core arrangement
Insulated conductors of multi-core cables are twisted in a cable core.
Waterproof cables are twisted with water blocking elements.
Inner sheath
It is made by extrusion with PVC-compound or chalk-filled non-cured rubber with the filling of outer gaps between insulated conductors. It is possible to fill the outer gaps between circular insulated cores with the bundles of non hygroscopic fiber or polymer materials with the lapping of fastening tape, on the top of which the extrusion inner sheath is laid. It is allowed to wrap the cable core with the layer of tapes of polymer material. It is allowed the sheathing of double-layer inner extrusion sheath.
Taping
It is made of tape or tapes of conductive paper or conductive synthetic tape or of tapes of non-woven fabric. In waterproof cables – a layer of water blocking tapes.
Screen
Is made of copper wires and a spirally imposed copper tape. It is allowed the taping of the screen with copper tapes.
Separating layer
Of polymer tape or non-woven fabric. In waterproof cables – a layer of water blocking tapes.
Bedding
Of PVC-compound.
Cable armoring
It is laid helically with two steel, galvanized tapes.
Over sheath
Of PVC-compound
The cables are designed for transmission and distribution of electric power at the stationary installation on the nominal alternating voltage 6 kV of frequency 50 Hz for networks with the earthed and insulated neutral.
They can be laid in dry soils (sand, sandy-clay and normal soil with a moisture content of 14%).
The climate modification УХЛ, categories of location 1 and 5 according to GOST 15150, including installation in the ground.
The class of fire hazard of the cables according to GOST 31565 01.8.2.5.4
Nominal voltage, kV | 6 | |
Ambient temperature during cable operation, °С |
from –50 to +50 |
|
Minimum bending radius, diameters of cable | for multi-wire | 12 |
for single-wire | 15 | |
at installation with usage of a special template | 7,5 | |
The cables are laid at temperature (without preheat), °С, not below | - 15 |
TABLE 1
Current-carrying conductors are manufactured single- or multi-wire according to the table
Type of current-carrying conductor | Nominal cross-section of conductor, mm2 | ||||
circular | sector-shaped | ||||
Copper | Aluminum | Copper | Aluminum | ||
single-wire | for single-wire cables | 16 - 50 | 16 - 800 | – | – |
for multi-wire cables | – | 16 - 400 | – | 50 - 400 | |
multi-wire | for single-wire cables | 16 - 400 | 25 - 800 | 25 - 400 | 25 - 400 |
for multi-wire cables | 16 - 400 | 25 - 400 | 35 - 400 | 35 - 400 |
To make an order
You can pre-order the products. After the receipt of your order a specialist of our company will contact you and offer the best delivery conditions.
«*»- required fields