ВВГ-ХЛ (VVG-KhL) – Russian analogue of NYY Cold Resistance АВВГ-ХЛ (AVVG-KhL) – Russian analogue of NAYY Cold Resistance ВВГЭ-ХЛ (VVGE-KhL) – Russian analogue of NYCY Cold Resistance АВВГЭ-ХЛ (AVVGE-KhL) – Russian analogue of NAYCY Cold Resistance ВБШв-ХЛ (VBShV-KhL) – Russian analogue of NYBY Cold Resistance АВБШв-ХЛ (AVBShV-KhL) – Russian analogue of NYIFY Cold Resistance ВВГ-П-ХЛ (VVG-P-KhL) – Russian analogue of NAYIFY Cold Resistance АВВГ-П-ХЛ (AVVG-P-KhL) – Russian analogue of NAY(F)BY Cold Resistance

VVG-KhL, AVVG-KhL, VVGE-KhL, AVVGE-KhL, VBShv-KhL, AVBShv-KhL, VVG-P-KhL, AVVG-P-KhL

Specifications 16.K121-017-2011

Construction Application area Technical data To order
To make an order

You can pre-order the products. After the receipt of your order a specialist of our company will contact you and offer the best delivery conditions.

Conductor

Copper or aluminum core, single-wire or multiwire, circular or sector-shaped form of the 1 or 2 class according to GOST 22483.

Insulation

PVC- compound (color coded conductor).

Core arrangement and twisting

Insulated conductors of 2, 3, 4, 5 or 6 core cables twisted in cable core.

For the cables of types VVG-P-KhL and AVVGP-KhL insulated cores are situated in parallel in the same flat

Inner sheath

It is made by extrusion with filling of exterior gaps between insulated cores or for not armored cables with copper conductors is allowed taping with PVC tapes with the filling of exterior gaps between insulated cores, insulating cords (bundles).

Cable armoring

For VBShV-KhL and AVBShV-KhL is made by spiral taping with two steel galvanized tapes.

Screen

For cables of types VVGE-KhL and AVVGE-KhL is made of copper tapes or copper wires and spiral taping with copper tape.

Cable sheath or jacket

PVC compound.

The cables are designed for transmission and distribution of electric energy in stationary installations on a nominal alternating voltage 0,66 and 1kV, nominal frequency 50 Hz or direct voltage 1 and 1.5 kV respectively.

While manufacturing the cables one use the materials, which allow the cables to be resistant to low temperatures up to - 60 °С (degrees below zero).

The class of fire hazard of the cables is according to GOST 31565 01.8.2.5.4.

Nominal voltage, kV 0,66 or 1
Ambient temperature during cable operation, °С from – 60 to + 50
Minimum bending radius, diameters of cable for multi-core 7,5
for single-core 10
The cables are laid at temperature (without preheat),  °С not below - 15

To make an order

You can pre-order the products. After the receipt of your order a specialist of our company will contact you and offer the best delivery conditions.

«*»- required fields