ППГнг(А)-FRHF (PPGng(A)-FRHF) – Russian analogue of NHXH FE180/E90 MICA ППГЭнг(А)-FRHF (PPGЕng(A)-FRHF) – Russian analogue of NHXCH, NHXCWH FE180/E90 MICA ПБПнг(А)-FRHF (PBPng(A)-FRHF) – Russian analogue of NHXBH FE180/E90 MICA

PPGng(A)-FRHF, PPGЕng(A)-FRHF, PBPng(A)-FRHF, according to specifications 16.K71-341-2004

specifications 16.K71-341-2004

Construction Application area Technical data Calculated data To order
To make an order

You can pre-order the products. After the receipt of your order a specialist of our company will contact you and offer the best delivery conditions.

Conductor

Copper, single-wire or multi-wire core, of circular or sector-shaped form, of the 1 or 2 class according to GOST 22483 with the cross-section from 1.5 to 1000 mm2.

Thermal barrier for CCC (current-carrying conductor) (for “FE180” and “FE240”)

The overlapping with two mica tapes.

Insulation

With halogen-free polymer composition.

Core arrangement and twisting

Insulated conductors of 2, 3, 4 and 5 core cables are twisted in a cable core.

Waterproof cables are twisted with water blocking elements.

Inner sheath

It is made in the form of filling of outer gaps between the insulated conductors with the halogen-free polymer composition.

Thermal barrier (for “FE 240”)

Overlapped with mica tapes.

Separating layer

For cables of types PPGЕng(A)-FRHF is additionally made with water blocking tapes.

Screen

For cables of types PPGЕng(A)-FRHF is made of lapping with copper tapes or of copper wires and a spirally imposed copper tape.

Cable armoring

For cables of types PBPng(A)-FRHF is laid helically with two steel, galvanized tapes.

For cables of types PBPng(A)-FRHF it is allowed the superimposition over the top of armor layer in the form of lapping or longitudinally with the water blocking materials.

Over sheath or jacket

Of halogen-free polymer composition.

The cables are designed for transmission and distribution of electric power in the fixed networks on the nominal alternating voltage 0.66 and 1kV and frequency 50 Hz.

The cables are used for group installation of cable power lines of safety systems, wiring circuits of fire safety, (the wiring circuits of systems of fire alarm, power of pumps of fire suppression, illuminations of emergency exits and escape routes, smoke removal systems and ventilation, evacuation lifts).

For wiring in the surgical departments of hospitals, of the wiring circuits of emergency power supply of the equipment (current collectors), functioning in case of fire.

The cables of types PPGng(A)-FRHF and PPGЕng(A)-FRHF are designed for group installation of cable lines in cable structures and premises of indoor (closed) electric installation in the absence of danger of mechanical damage during operation.

The cables of type PBPng(A)-FRHF are designed for group installation of cable lines in cable structures and premises of indoor (closed) electric installation in case of danger of mechanical damage during operation.

Single-wire cables of type PBPng(A)-FRHF are designed for operation in direct voltage networks.

The class of fire hazard of the cables according to GOST 31565 П1б.1.1.2.1.

Nominal voltage, kV 0,66 or 1
Ambient temperature during cable operation, °С from – 50 to + 50
Minimum bending radius, diameters of cable for multi-wire 7,5
for single-wire and flat 10
The cables are laid at temperature (without preheat), °С, not below - 15
Fire resistant of the cables, min, not less with the index FE180 180
with the index FE240 240

TABLE 1

Nominal voltage of the cables, number and nominal cross-section of current-carrying conductor

* – for operation in DC voltage only

Type of cable Number of conductors Nominal cross-section of main conductors, mm2
Nominal voltage, kV
0,66 1
PPGng(A)-FRHF, PPGЕng(A)-FRHF 1 1,5 – 50 1,5 – 1000
PBPng(A)-FRHF (1,5 – 1000)*
PPGng(A)-FRHF, PPGЕng(A)-FRHF, PBPng(A)-FRHF 2, 3, 4, 5 1,5 – 50 1,5 - 400

 

TABLE 2

Cross-section of copper wires

Designation Nominal cross-section of main conductors, mm2
Main conductors 1,5 2,5 4 6 10 16 25 35
Screen 1,5 2,5 4 6 10 16 16 16

 

Designation Nominal cross-section of main conductors, mm2
Main conductors 50 70 95 120 150 185 240 300 400
Screen 25 35 50 70 70 95 120 150 185

To make an order

You can pre-order the products. After the receipt of your order a specialist of our company will contact you and offer the best delivery conditions.

«*»- required fields