КУППмнг(А)-FRHF (KUPPmng(A)-FRHF) - Russian analogue of JE-LiHCH…Bd FE180/E60 , RD-HCH…Bd FE180/E60
SCOPE AND PURPOSE
The cables are designed for transmission of signals with the operational voltage up to 250V of alternating voltage of frequency 50 Hz or of voltage up to 350V of direct voltage to 300mA in communication systems and fire protection systems for general industrial use, including buildings and structures of subway and for connection of transducers and actuators to software and hardware tools of APCS for laying inside the main process of the NPP, for operation outside the containment of nuclear power plants of class 2, 3 and 4 according to classification НП-001-97 (ОПБ-88/97).
The climate modification B, categories of location – 5, atmosphere type IV (coastal-industrial) according to GOST 15150.
Fire resistance not less than 180 min.
The class of fire hazard of the cables according to GOST 31565 П1б.126.96.36.199.
The cables do not spread combustion at laying bunches of cables on category A
Cables are resistant to salt mist.
Cables are resistant to dynamic dust.
Cables keep working under the influence of earthquakes intensity of 9 points on the MSK.
Технические характеристики кабеля КуППмнг(А)-FRHF
Number of pairs in the cable
1; 2; 4; 8; 12; 16; 20; 32 and 40.
Copper, with the cross-sections 0.5 mm2
Taping with a mica tape.
Halogen-free polymer composition.
Core arrangement and twisting
Two insulated conductors with the general coloring of different colors are twisted in a pair.
The pairs are twisted in basic four-pair bundles, the basic bundles are twisted in a cable core.
Spiral overlapping with PET-E tapes.
Braiding with copper galvanized wires.
Halogen-free polymer composition. The color of over sheath is grey, for fire resistant cables – orange. It is allowed different color of the sheath by agreement with a customer.
|Number of conductors, nominal cross-section (mm2), construction, voltage (kV)||Calculated diameter of cable, mm||Calculated weight of cable, kg/km|