About the plant

Joint stock company "Plant "Energokabel" was established in 2000 in town Elektrougli, Noginsk district of Moscow region. The design of the Plant was made by the State Specialized Design Institute of Nuclear Ministry of Russian Federation and the National Scientific Research Institute of Cable Industry.

The output of products has been carried out since April 2002. Until present, we have come a long way from the beginning of production activities "from scratch" to the recognition of the Plant as one of the leading enterprises in cable industry in the country.

In 2003, "Plant "Energokabel" was accepted into the Association "Elektrokabel", which unites 65 largest producers of cable production in Russia and CIS countries. In 2005 the enterprise was taken as a member of the International Association "Intercable". Today "Plant "Energokabel" is one of the most dynamically developing enterprises of the cable industry of Russia.

Plant “Energokabel" is a modern enterprise, equipped with a high performance equipment, allowing to perform all the technological operations for the manufacture of cable and wire products, including testing, marking and packaging. The Plant is specialized in the production of cables of a large range of cable and wire products.

The range of manufactured products includes:

Power cables on nominal voltage up to 3kV

Cables for single installation: VVG, AVVG, VVGE, AVVGE, VBShv, AVBShv, PvVG, APvVG, PvVGE, APvVGE, PvBShv, APvBShv, PvVG-P, APvVG-P, PvBShp, APvBShp,

VVG-P, AVVG-P, NYM-J, NYM-O:

-modification – “ng(A)” – flame retardant at group laying:

VVG, AVVG, VVGz, AVVGz, VBbShv, AVBbShv, VVG-P, AVVG-P, PvVG, APvVG, PvVGE, APvVGE, PvBShv, APvBShv, PvVG-P, APvVG-P, PvBShp, APvBShp

-modification – “KhL”, “ng(A)-KhL” – flame retardant at group laying, cold resistant

VVG-KhL, AVVG-KhL, VVGE-KhL, AVVGE-KhL, VBShv-KhL, AVBShv-KhL, VVG-P-KhL, AVVG-P-KhL;

-modification – “ng(A)-LS” – flame retardant at group laying, with low smoke- and gas emission: VVGng(A), AVVGng(A), VVGEng(A), AVVGEng(A), VBShvng(A),

AVBShvng(A);

-modification – “ng(A)-HF” – flame retardant at group laying and not emitting corrosive active products at burning and smoldering. The insulation and sheath of the cable are made of halogen-free polymer composition: PPGng(A)-HF, PPGEng(A)-HF, PBPng(A)-HF, PPGgng(A)-HF, PPGEgng(A)-HF, PBPgng(A)-HF;

-modification – “ng(A) -FRLS” – fire resistant, flame retardant at group laying, with low smoke- and gas emission: VVGng(A) -FRLS, VVGEng(A) -FRLS, VBShvng(A) -FRLS, VVG-Png(A) –FRLS, PvVGng(A) -FRLS, PvVGEng(A) -FRLS, PvBShvng(A) –FRLS;

-modification – “ng(A)- FRHF” – fire resistant, flame retardant at group laying and not emitting corrosive active products at burning and smoldering. The insulation and sheath of the cable are made of halogen-free polymer composition: PvPng(A)-FRHF, PvPEng(A)-FRHF,

PPGng(A)-FRHF; PPGEng(A)-FRHF; PBP ng(A)-FRHF; PvPGng(A)-FRHF, PvPGEng(A)-FRHF, PvBP ng(A)-FRHF; PvPGgng(A)-FRHF, PvPGEgng(A)-FRHF, PvBP gng(A)-FRHF;

-modification – “ng(A)-FR KhL” –fire resistant, flame retardant at group laying, in cold resistant modification: VVG ng(A)-FR KhL, VVG-P ng(A)-FR KhL, VVGE ng(A)-FR KhL, VBShv ng(A)-FR KhL;

-modification – “ng(A) -FRLSTx” – fire resistant, flame retardant at group laying, low toxic, with low smoke- and gas emission: VVG ng(A)-FR LSLTx, VVG-P ng(A)-FR LSLTx,

VVGE ng(A)-FR LSLTx, VBShv ng(A)-FR LSLTx, RVG ng(A)-FR LSLTx, RVG-P ng(A)-FR LSLTx, RVGE ng(A)-FR LSLTx;

Power cables for nominal voltage up to and inclusive 6kV

Cables for single installation: VVG, AVVG, VVGg, AVVGg, VBV, AVBV, VBVg, AVBVg:

-modification – “ng(A)” – flame retardant at group laying: VVGng(A), AVVGng(A), VVGgng(A), AVVGgng(A), VBVng(A), AVBVng(A), VBVgng(A), AVBVgng(A):

-modification – “ng(A)-LS” – flame retardant at group laying, with low smoke- and gas emission: VVGng(A)-LS, AVVGng(A)-LS, VVGEng(A)-LS, AVVGEng(A)-LS, VBShvng(A)-LS, AVBShvng(A)-LS;

-modification “KhL” “ng(A),-KhL” – flame retardant at group laying, cold resistant:

KVEBShv-KhL, KVEBShv(u)-KhL;

Control cables

-modification – “ng(A)” – flame retardant at group laying:

KVVGng(A), KVVGzng(A), KVVGEng(A), KVBbShvng(A), KVBbShvzng(A);

-modification - “ng(A) -KhL” – flame retardant at group laying, cold resistant:

KVVGng(A) -KhL, KVVGzng(A) -KhL, KVVGEng(A) -KhL, KVBbShvng(A) -KhL, KVBbShvzng(A) -KhL;

-modification – “ng(A)-LS” – flame retardant at group laying, with low smoke- and gas emission. Smoke developed in a test cell is not more than 50 per cent: KVVGng(A) –LS, KVVGzng(A) –LS, KVVGEng(A) –LS, KVBbShvng(A)-LS, KVVG-Png(A) –LS;

-modification – “ng(A)-HF” – flame retardant at group laying and not emitting corrosive active products at burning and smoldering. The insulation and sheath of the cable are made of halogen-free polymer composition: KPPGng(A)-HF, KPPGEng(A)-HF, KPBbPGng(A)-HF;

Cables for systems of fire alarm

-modification – “ng(A)-LS” – flame retardant at group laying in A category, with low smoke- and gas emission: KPSVVng(A)-LS, KPSVVGng(A)-LS, KPSVEVng(A)-LS, KPSVEVGng(A)-LS, KPSVEEVng(A)-LS, KPSVEEVGng(A)-LS;